Setting up the photo booth was easy once I saw that post about using PVC pipe to create the structure.
Using my chop saw made quick work of cutting the pipe to the dimensions I needed; the 3-way fittings and elbows worked great to not only build the box but to make it stable. I draped a few yards of muslin over the top and sides, then stood a piece of matt board at the back. I ran a roll of tracing paper across the ‘floor’ of the booth and up and over the matt board – folded the paper over the top of the board to hold it securely in place, then left the paper uncut on the roll in the front of the booth so it could easily be replaced as needed. With a lamp placed outside the muslin ‘wall’ I was ready to shoot some pottery images. The whole task took about 20 minutes from start to finish. An added benefit is that the PVC is very lightweight which will make it easy to move and quick to disassemble and reassemble should I ever need to do so.